Be Your Own Plumber With The Help Of This Advice
If you're a home owner unfamiliar with plumbing, you're probably familiar with the experience of being charged an arm and a leg for what seems like a simple plumbing repair. If you'd like to avoid this experience again, read on for some advice and tips on how to fix your own plumbing.
Find a plumber that you can trust. Make sure to get referrals from friends and family so that you can prevent getting ripped off, which happens often. Also make sure not to pay the plumber before the work is completed. If you do that, there will not be an incentive to get the job completed in a timely manner.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.
To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.
If the hose that leads to your kitchen sink has not been maintained or installed properly, you may notice that water is constantly draining to the dishwasher. Your hose must run in a hill pattern to avoid water mixing. Think of the St. Louis Arch -- start from your sink, go uphill with the hose, and then down before connecting to the dishwasher. This way, only pressurized water can travel through the hose. Leakage won't be an issue.
You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.
Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.
Before the cold season hits, check out the condition of your gutters on the roof of your house. Remove all debris, leaves and branches so that you can have a smooth flow of water and easy drainage. Caretaking in advance will help to prevent serious issues with plumbing down the road.
To be successful in any plumbing project, make sure you turn the water off before you start unscrewing pipes. This tip might actually sound insulting, but you are probably getting caught up in having the right tools and parts and being dressed right. Double check that there is not a splash waiting for you. Then triple and quadruple check.
Use a product like BioBen if you are planning to leave your system shut off for a few weeks. Water will still remain in the pipes and could start smelling because it is not moving. This type of product will keep the water from stagnating and from smelling too bad.
When you are working with plumbing, you also need to have some basic skills in other areas. This is especially true of electrical problems, as the two systems often overlap. This doesn't mean that you need to solve the problems, but that you understand what the problems could be.
When you are deciding to work on a plumbing project yourself, first make a list of all of the tools and items that you could possibly need. After this, make sure that you have all of these things close at hand. There is nothing worse than almost finishing a project, but not having the correct screw.
Look at your hot water heater and make sure that the temperature is not higher than 120 degrees Fahrenheit. If it is, it could cause you to get burned or it could reduce the unit's energy consumption. If you determine that the temperature is too high, adjust immediately to avoid any of these things from happening.
Plumbing isn't as hard as it can seem, when you have access to good information and advice about how to go about solving your own plumbing problems. Next time you have plumbing problems in your house, try applying the tips from this article and see if you can save some money by solving it yourself!